Step 1
On every clients use Command
system-view
easy-operation commander ip-address 192.168.100.3
Step 2
In FTP server 192.168.2.48, copy all required files, software and patch files
Step 3
In commander switch Use Command
system-view
easy-operation commander ip-address 192.168.100.3
easy-operation commander enable
easy-operation
ftp-server 192.168.2.48 username admin password EasyOperation
backup configuration interval 2
client auto-join enable
Step 4
Specify file information and file activation mode on the Commander.
Create a group g1 for 192.168.100.4
System-view
easy-operation
group custom ip-address g1
match ip-address 192.168.100.4
system-software (name of file)
patch (name of file)
quit
Create a group g2 for 192.168.100.6
system-view
easy-operation
group custom ip-address g2
match ip-address 192.168.100.6
system-software (name of file)
patch (name of file)
quit
Create a group based on device type s5700-li
System-view
easy-operation
group build-in s5700-li
system-software (name of file)
patch (name of file)
quit
Create groups like above for each switch either device-type wise or IP address wise
Device-type will include all switches with same model
Step 5
Start the batch upgrade process.
Can upgrade group wise or all groups at same time
1.Group wise
System-view
Easy-operation
Upgrade group g1
Press Y for confirm
Can check status of upgrade of switch by command display easy-operation download-status
After upgrade, switch will get reboot. Can see status using the above command
2.ALL Groups same time
System-view
Easy-operation
Upgrade group
Press Y for confirm