Step 1
Download Software file and Patch file from Huawei using account
Step 2
Copy it to folder of TFTP server ( 192.168.2.20)
Step 3
Login to switch and copy file to switch from TFTP server
Give command tftp 192.168.2.20 get (filename of software file)
Give command tftp 192.168.2.20 get (filename of patch file)
Step 4
Verify both patch files and software files are copied to flash directory of switch
Give Command dir
Step 5
Register patch file and software file to switch board
Give Command startup system-software (filename of software file from flash of switch)
Give Command startup patch (filename of patch file from flash of switch)
Note: For switch 100.4, master and slave board present . So need to copy files from flash of master to slave
Give command copy flash:/(filename of software file from flash of switch) slot1#flash:/
Give command copy flash:/(filename of patch file from flash of switch) slot1#flash:/
Configure patch file and software file to slave board
Give command startup system-software (filename of software file from flash of switch) slave-board
Give Command startup patch (filename of patch file from flash of switch) slave-board
Step 6
Verify software and patch fhas updated for the next startup
Give command display startup
Check new software and patch file is showing for next startup
Step 7
Give Command reboot
Step 8
Verify software and patch has updated after reboot
Give Command display version for checking software
Give command display patch-information for checking patch
File copy from Master switch(100.4) to Slave
Step 1
Copy file from ftp to flash of master
Copy file from flash of master to flash of slave
Give command copy flash:/s5700li-v200r011sph017.pat slot1#flash:/
Step 2
Configure patch file and software file to slave board
Give command startup system-software s5700-x-li-v200r011c10spc600.cc slave-board
Give Command startup patch s5700li-v200r011sph017.pat slave-board